|
Posted by Chris on August 19, 2024 at 00:32:54.
|
My hifer beacon finally bit the dust after a good run. It had sustained water damage. Cleaned up the circuit board a bit and had to run a wire to by pass circuit trace to make it work again last month. It finally had quit. I built a new one and it is up and running . I reduced the power from 3.8 mw down to about 2.5mw. It is currently at about 13564.80~ give or take a few kHz. It is also still using the same efhw vertical antenna. Chris
|
Follow Ups:
|